GloveBox
The VASTAL Virginarium is a six person Glove Box artistically designed by Adam Zaretsky and Mason Juday. The glove box is being made using the WAAG Society¹s FabLab laser cutting and rapid prototyping machinery. It is designed to provide a sterile field for Bioart Laboratories. But it is also designed for public performances, which revolve around cultural interpretive issues of purity, sterility and cleanliness. Much like a sterile hood used in biology for pure culture technique, this glove box has Positive air pressure. This means VASTAL Virginarium is "pumped up² with more HEPA filtered air then the surrounding space outside the cleanspace of the glovebox. The twelve ports correspond to twelve rubber gloves which make it possible for six people to collaborate on aseptic art projects/performances which are to be held inside the glove box.
Early 3d study for GloveBox

GloveBox at the Waag
Project Blog
CNC Table @ ProtoSpace
Cutting large pieces at ProtoSpace in Utrecht. Since there was a large format (approx. 250cm x 120cm) CNC table router available we were able to cut the larger pieces out of wood (OSB: oriented strand board), which simplified the assembly and lowered the cost.
In addition to cutting out the shapes, we also milled partial-depth grooves to position the acrylic pieces and to hold them in place.
- 463 reads
-
- Printer-friendly version
- Send to friend

Full-scale Mock-up
We made a partial, full-scale mockup of the design to make sure our assumptions about scale were in fact correct, and to make final adjustments to the dimensions.
Proof of concept.

- 502 reads
-
- Printer-friendly version
- Send to friend

GloveBox Development
Development of pseudo-iris entryway and GloveBox section/elevation

The design as planned for production using only the laser cutter (note segmentation of end pieces). This was the material purchasing layout.

GloveBox Conceptualization
Watercolor diagram - origin of design (Adam Zaretsky)

Initial sketches (Mason Juday)

