Modela MDX-20

http://www.rolanddga.com/asd/products/scanners/MDX15

The Modela is used for milling and scanning. Check out the technical data below for more info on dimensions and tools.

For milling, the file format used is STL. If your 3D software does not output this format, use

Milling bits currently in the lab:

0.3 mm flat tip
1mm flat tip (two)
3 mm ball tip
3 mm flat tip
4 mm flat tip
5 mm flat tip
6 mm flat tip

5 different engraving bits

Dimensions:

Table size
8-5/8"(X). x 6-1/4"(Y)
(220 mm x 160 mm)

Maximum operating area
8 "(X) x 6 " (Y) x 2-3/8" (Z)
(203.2mm x 152.4mm x 60.5mm)

External dimensions
18-13/16"(W) x 15-1/16" (D)x 12-1/16"(H)
(476.8 mm x 381.6 mm x 305 mm)

Modelling functions:

Spindle speed (fixed)
6500 rpm

Feedrate
0.00393 to 9/16 in./sec. (0.1 to 15 mm/sec.)

Acceptable material
Wood, Plaster, Resin (modeling wax, styrenform), Chemical wood, Aluminum (A5052 according to JIS), Brass

Software resolution
0.000984 in./step (0.025 mm/step)
Mechanical resolution
0.000246 in./step (0.00625 mm/step)

Scanning functions:

Probe length 60 mm (2-5/16 in.), tip bulb diameter 0.08 mm (0.00315 in.)

Scanning speed
4-15 mm/sec. (1/8-9/16 in./sec.)

Exportable file formats
DXF, VRML, STL, 3DMF, IGES, Grayscale, Point Group and BMP